Angle Back Servo Cover / Fairing
Introducing the Angle Back - a sleek new servo cover for general purpose aerodynamics.
Slightly smaller cousin to the Diamond servo cover.
In our constant pursuit of aerodynamic efficiency and mechanical protection we designed and manufactured the Angle Back - made from .040 High impact polystyrene or .032 clear PetG plastic - your choice - just write your preference when you purchase on Paypal.
In the pictures you see what can be accomplished with a coat of paint ( Green and black on the inside), a pair of scissors and a piece of sand paper.
The servo covers will arrive rough cut with a suggested cut line.
Glue or tape in position. You can also install it with screws for easy removal.
This servo cover / fairing can also be used for any situation where a cover is needed.
Let your imagination run wild!
Introducing the Angle Back - a sleek new servo cover for general purpose aerodynamics.
Slightly smaller cousin to the Diamond servo cover.
In our constant pursuit of aerodynamic efficiency and mechanical protection we designed and manufactured the Angle Back - made from .040 High impact polystyrene or .032 clear PetG plastic - your choice - just write your preference when you purchase on Paypal.
In the pictures you see what can be accomplished with a coat of paint ( Green and black on the inside), a pair of scissors and a piece of sand paper.
The servo covers will arrive rough cut with a suggested cut line.
Glue or tape in position. You can also install it with screws for easy removal.
This servo cover / fairing can also be used for any situation where a cover is needed.
Let your imagination run wild!
MORGAN RC
A division of www.morganmill.com
|
|
|
|
|
|
|
|
Angle Back Servo Cover
$7.95
$7.95
Angle Back Servo Cover
Installed Plane List
Made in the USA
